GB/T 16623-2022 Translated English of Chinese Standard (GB/T 16623-2022, GBT16623-2022): Technical specification of pressed-on solid tyres
https://www.chinesestandard.net, Dec 22, 2022 - Technology & Engineering - 13 pages
This Document specifies the technical requirements, test methods and markings for pressed-on solid tyres. This Document applies to new pressed-on solid tyres used on counterbalanced forklift trucks and other industrial vehicles.
48h after vulcanization Abrasion quantity according to Formula according to GB/T Akron Angle of angular-cut Appearance Quality Bead delamination centerline circumference ratio Diameter deviation diameter of tyre Dimension of Tyres Document Edition Elongation at break Figure A.1 Formula B.1 HG/T inner perimeter integer least 24h marks Matching Dimension Measurement Method Mechanical Properties metal and rubber Method GB/T Non-marking Normative outer diameter Outer Edge Dimension outer perimeter parked at room physical and mechanical Pressed-on Solid Tyres Properties of Tyre provisions of Appendix provisions of GB/T Quality of Tyres rim wheel Rims and Matching rounded-off section width Shandong sidewall Specification of Pressed-on specified in GB/T specimen steel ring steel ruler strength between metal Table A.2 tensile property test Tensile strength Terms and Definitions test method tested according thickness tread rubber tyre shall comply Tyres and Rims Values GB/T vernier caliper Vulcanized or Thermoplastic Wang Width of angular-cut width of tyre